IMPORTANT – FREQUENCY UPDATE
Trimble are updating their RTX™ real-time correction streams to AES Encryption and changing to new satellite beams to provide you with the most advanced technology available, ensuring network coverage expansion for years to come.
These changes will provide you with additional data security, technology enhancements, and greater access to Trimble’s ever-expanding CenterPoint® RTX Fast network, with increased reliability and access to faster convergence times in more areas.
This means it is essential to update your firmware, unless it is the minimum version or above, and configure all Trimble RTX and Trimble xFill® compatible devices to frequency: 1545.4900 MHz / Baud Rate: 2400 bps thus ensuring no loss of Trimble RTX and Trimble xFill positioning services.
Firmware should be as indicated in the chart below or higher. If your firmware is a lower version, please contact info@vantage-ag.uk.
| Device | Minimum Firmware Version |
|---|---|
| GFX-650 / NAV-900 | 1.01 |
| TMX-2050 | 4.2.1 |
| CFX-750 | 7.75 |
| FmX | 10.01 |
For instructions on how to check your firmware version and selecting the right frequency, please select your product from the following links.
Trimble RTX EA Frequency Update on TMX-2050 Precision-IQ Display – https://youtu.be/UmQZO_9dXG0
Trimble RTX EA Frequency Update on TMX-2050 FmX+ or FmX Display – https://youtu.be/yXwiw2taAWo
Trimble RTX EA Frequency Update on CFX-750 Display – https://youtu.be/QuVYX7w_0C8
